website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 1 mb2s thru mb10s single phase 0.8 amps. glass passivated bridge rectifiers voltage range 200 to 1000 volts current 0.8 amperes features ideal for printed circuit board reliable low cost construction technique results in inexpensive product high temperature soldering guaranteed: 260 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ul recognized file number: e347214 mechanical data case: molded plastic lead: solder plated polarity: as marked maximum ratings and electrical characteristics rating at 25 ambient temperature unle ss otherwise specified. single phase, half wave, 60hz, resistive or inducti ve load.for capacitive load, derate current by 20% symbols mb2s mb4s MB6S mb8s mb10s units maximum repetitive peak reverse voltage v rrm 200 400 600 800 1000 v maximum rms voltage v rms 140 280 420 560 700 v maximum dc blocking voltage v dc 200 400 600 800 1000 v maximum average forward rectified current on glass-epoxy p.c.b. on aluminum substrate i (av) 0.5 0.8 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (jedec method ) i fsm 35 a maximum instantaneous forward voltage at 0.4a v f 1.0 v maximum dc reverse current @ t a =25 rated dc blocking voltage per leg t a =125 i r 5.0 500 a typical thermal resistance (note1) (note2) r ja r jl 70 20 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 note: 1.on aluminum suvstrate p.c.b. with an area of 0.8 0.8?(20 20mm) mounted on 0.05 0.05?(1.3 1.3mm) solder pad. 2. thermal resistance from junction to case with units mounted on 2.6 1.4 0.06 thick(6.5 3.5 0.15cm)al.plate.
website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 2 mb2s thru mb10s rating and characteristic curves mb2s thru mb10s note: specifications are subject to change without notice.
|
